Item Price : £
MX5 Seat Conversion Bracket Set Standard or Tall Driver - Early TR4 83.00 inc vat
(Floor pan work required - please call for information)
MX5 Seat Conversion Bracket Set Standard or Tall Driver - Late TR4/4A/5/250/TR6 83.00 inc vat
Fitting service (labour only) available for Late TR4/4A/5/250/TR6 75.00 plus vat
Mazda cover cap set to hide nut & stud (8 pieces) 42.00 inc vat
Our standard bracket set is a bolt in installation utilising the original seat runner anchor nuts in the floor pan.
Our brackets will fit MK1 and MK2 seats from MX5 and Miata.
MK1 seats have integral headrest.
MK2 seats have sliding headrests and also require some metal work to the seat runners by means of a hack saw or grinder.
You will require a complete Mazda seat runner set, make sure these runners are attached to the appropriate seat as the installation is asymetric.
Supplied in bare steel finish.
MKI seat with integral headrest MKII seats fitted in a TR4A Recovered seats ready to go into a TR5 MK11 seats fitted for customer into a TR4A
Correct layout of the Mazda runners, the tilt lever goes MX5 seat buckets benefit from a coat of paint! Mazda MK2 Approximate Dimensions
outboard and the fore aft adjustment lever goes inboard
IMPORTANT: The seat belt anchor on the seat must be deleted, simply remove with a 17mm spanner. only the original Triumph seat belt anchor points must be used.
MK1 seats with integral headrests MK2 seats with sliding headrests extended.
TR6 with MK2 black leather seats fitted MK2 seats black leather with back piping
Close
up of a Mazda seat runner bolted to the TR Trader
Sliding headrest Mazda Seats as fitted to our latest TR6 restoration
MK2 Mazda seats fitted in TR6
conversion brackets, also shown is the 7/16 AF bolt head We re-trimmed the entire car in RR magnolia leather.
which screws into the original TR seat anchor point in the floor pan.
TEL: +44 (0)161 485 5005 email: sales@trtrader.com Mobile: +44 (0)7831 826877